Friday 23 October 2020

EXTREMA RATIO MISERICORDIA


 New from Extrema Ratio in 2020, this small lightweight knife, named MISERICORDIA is clearly a tactical knife. At only 4mm thickness, sporting a glass fibre reinforced handle and sheath system, the Extrema Ratio Misericordia also features a "Finger ring" and added glass breaker, for those moments you'll need to smash your way out of or into a vehicle or similar. It goes without saying the edge was deadly razor sharp out of the box.


The Extrema Ratio Misericordia has a spear point and a false edge with a deep double blood groove/fuller plus aggressive finger gimping. It is an easy knife to grip with or without gloves. Plus I have to agree with ER, it can be rapidly deployed from the FRN scabbard as well. The release system is just a smaller version (somewhat better I think in design) than the same sheath retention system for the Giant Mamba and the Contact.


The product is aimed towards the military market and clearly can not transition into civilian fields unlike many of their other "military" type models. Although, there are 2 other carry options which could allow "concealed carry" where legal to do so (like on the battlefield). So in this respect I will be limiting my discussion here to what I see as it's intended purposes.


Worn appropriately, the Extrema Ratio Misericordia can be extracted very fast, either with a reverse grip, blade facing away angled up, tip angled down or extracted with blade facing down, tip facing away and up. Take your pick here. Extrema Ratio are advocating the Misericordia can be used as a primary knife (for sure as it cuts very well) or as a backup. 

Despite mentioning the end ring could be utilised by some "martial arts" they certainly go no further as to endorse this use. Obviously it is up to the end user to decide how they will use the Misericordia. It's possible it could be thrown too and or used as one of those, what do you call it? dart things???? (I didn't say it!). You get my point right (no pun intended), with a little imagination I'm sure I could easily launch arrows from it as well after adding a bit of powerful elastic rubber to the ring. Anyway enough of that.


The finger guard (slight gimping present) is long enough I feel to prevent accidental slippage onto the edge. As with many Extrema Ratio Models, the scales are attached with one bolt. The scales in this case are NOT Forprene as in so many of their current models but glass fibre reinforced Nylon (FRN) in a "clam shell" design.


Blade steel is of course metal oxide coated N690 Cobalt stainless tool steel.


Stay tuned to BCT for a closer tactical look at this blade and carry system.



BCT



Tuesday 20 October 2020

CUCHILLO AITOR 14" SURVIVAL Olivo A classic collector's knife!



 CUCHILLO AITOR 14" SURVIVAL Olivo. 


A classic "survival knife"  and collector's item!

Aitor 14" Survival Knife circa well before 2010!

A classic survival knife design dating back many years. Plus it looks COOL! Like a real knife.

Today I purchased a knife which I have been looking at for the last three years. The same knife has been sitting behind a window in a favourite shop of mine for probably many years, possibly at least 9/10! It is an Aitor knife made after Pielcu took over Aitor, as it sports the serial number beginning with B, this particular one: B025863.

Yes, it is not from the original Aitor series (they made them with stag, micarta, phenolic and Olive wood handles over the years)  whereby the serial number would begin with "A", none the less, it has become a collector's item as evidenced by its rarity and crazy prices on the internet. To my knowledge, neither the "A" nor the "B" models are in production any more,

so if you want one you have to find one that's been sitting on a physical shelf in some physical store or Ebay etc.

One of my Spanish viewers on BushCampingTools just told me he was issued with this model back in 1980 when he was in the Spanish Special Forces!

The Specifications:

6mm 1/4" spine and tang


The handle is thick enough to actually custom grind it to fit your hand perfectly!


Solid Olive wood scales

Brass lanyard rivet 

Brass and Aluminium riveted scales

140mm blade, partially serrated (like the early PUMA knives), useful for starting cuts, then to be followed by the regular blade.

There is a more than generous lower finger guard.







Deep belly, perfect for skinning (not too long either), weight forward for chopping if necessary 

Spine serrations

Blade serrations 

HRC 55-58

HRC diamond imprint on blade.

There are some interesting deadly sharp serrations of a non-standard design upon the spine edge (this design dates way back to their early designs from Aitor before being taken over several times. They would be very good at fish scaling and cutting cords. The tip of the Aitor 14" Survival has a swedge portion which has been sharpened (this was indeed very sharp out of the box). Having such a design will aid penetration for a thick 1/4" blade such as this. There is also a flat portion for striking a baton against.



Weight (it's not light!) 338grams! or 12Oz.!

Full leather scabbard, stitched and riveted construction, press stud retention strap.



Construction

The overall build construction I could not fault. It has been made very well however, like many Aitor knives today, they come sharp but far from deadly sharp out of the box. Some  minutes on 600, 800 and then 1500 paper (~ 40 minutes or so in total) I had it very sharp. Clearly it had never been in it's scabbard since leaving the factory in Spain as evidenced by the somewhat rigid nature of the leather (just dried out over such a long time under shop air con/low RH). This latter thing is sort of a good thing as no mould has grown upon it either over such a long time in the box.


The scabbard looks "wet" because I just applied some leather treatment to it and now the hair dryer to warm it up a bit.
I  had to treat the leather scabbard with some quality leather waterproof wax, softener, to "stretch" it a bit to be able to fit the knife, as the leather had shrunk slightly over all those years unused.

Can it cut? of course it can, shown here some wild mushrooms, onions (later garlic, not shown here etc.)


Field test coming soon!




BCT



Sunday 18 October 2020

WORK TUFF GEAR NOMAD a ZEKE MENACHO Design Made with Japanese SK 85




Work Tuff Gear NOMAD a Big All Purpose Field Knife

Preview by BCT



The blade is acid stone washed and has laser engraved what production number it is along with a manufacturing date.





The philosophy behind the design of the NOMAD


"The Nomad was sketched out after a 2 week-long camping trip to the Sequoia National Forest back in 2012. The idea behind it is both wonderfully complicated and brilliantly simple at the same time. I wanted a knife that did what a Bowie is supposed to do historically. Chop like a hatchet, stab like a dagger, and cut like a kitchen knife. So in many ways, the Nomad is just that, a big, wonderful “jack of all trades” knife that in my opinion does not suffer from some of the weaknesses associated with the traditional Bowie shape knife designs ie the more delicate tip, sometimes odd ergos, and a guard to get in the way of finer jobs. So the tip was replaced with a traditional Tanto style, the guard becomes an integrated choil/guard for saving your hands in a hard stab and effectively reducing both the size of the usable blade and giving more control for finer detail work. Finally the handle, after years of working with Dark Timber Knives behind the scenes, all that ergonomic work we did on the Hooligan and Kodiak show up in this multiple position handle. Add to this package a forward cant with a long wide blade and you have a very capable large knife that looks like nothing else on the market. This knife is comfortable to hold/use in FOUR positions. The grind is high enough to be a good slicer. There is plenty of spine thickness to do heavy work, and the tip geometry makes thrusting fun and easy".

Zeke Menacho


Work Tuff Gear are without any doubt making some seriously good products in the field of outdoor equipment.


Their attention to: detail in design, use of quality raw materials, heat treatment regime and quality hand sharpened edged tools, along with excellent wood burning camp stoves, is taking the market by storm. The Nomad Knife is no exception.
Manufacturing date and number inscribed upon the blade. BTW That giant "M" does not stand for Monster but for the logo of the Designer Zeke Menacho!

Made from a sturdy slab of Japanese SK85 high carbon tool steel, featuring a high angled full flat grind to a convex cutting edge. The Nomad sports a pointy but strong tip, easily able to penetrate game, whether that's gutting fish or piercing hides.
The top of the spine is acute enough to easily strike a fire steel and also at such dimensions, can take the pounding of a baton for splitting fire wood if need be.
The blade has been acid washed making it sort of anti reflective but remember this isn't a stainless steel so remember to wipe it down and clean it with a little cooking oil or food grade mineral oil.


But what of fine tasks? Yes it's a big knife but can one perform the finer tasks like easy preparation of the evening meal? Can one feather timber for tinder or is this beast simple too big to handle?

There is a very secure and comfortable grip, plus lots of metal real estate to enable one to securely control such a large 9 inch long bladed knife in order to perform tasks such as feathering.
Careful of the toes!

This 2 year seasoned wild plum wood. It's like steel but no match for that super edge on the Work Tuff Gear Nomad! Product number 216. This is a high Sabre grind and because of that one can still slice and cut despite a 1/4" spine.

Yes, yes, yes is my answer after several days initial tests with the Nomad. Preparing pineapples, cutting raw meat, cutting cooked meat and fine slicing ingredients. SO, if one can easily achieve these things then there will be no question about being able to achieve seriously heavy duty tasks around the wilderness camp.




A quick test drive in the kitchen (and day out) only proved what I could already see in the design of this knife, one can easily use it to prepare food with. As you all know, this is an absolute must for me in an outdoor knife. If you can't easily prepare food with a knife that's supposed to be intended for outdoor use, then it "Aint for the outdoors"!

I like the design of the handle too because if one is using it to chop up food on a flat surface, your hand is protected against getting bashed into the surface, however this is achieved without the use of a tradition guard.


Speaking of the handle, not only does it look very cool and in fact appears at first glance like wood (with a kind of dark Walnut look about it), it is made from G10 with a very grippy, yet very comfortable milled pattern, that adds to the impression of a wooden handle but with all the benefits of a synthetic composite that should resist water ingression and sweat.


Those scales surround a 1/4'' thick slab of super tough, super stay sharp Japanese SK85 High carbon tool steel. The grip features a palm swell and is very comfortable and secure when wielding this massive multi-purpose knife.


Carrying this Beast

Transportation is achieved via a "Tek Lok" like tactical belt clip, fully adjustable for varying belt widths and features a safety lock (finger pointing second image). The knife itself isn't light and weighs in at a whopping big 980grams! (don't bother with a hatchet! LOL!)




No nonsense Kydex scabbard








BCT





EXTREMA RATIO SETHLANS SURVIVAL KNIFE WOW!

 EXTREMA RATIO SETHLANS 

SURVIVAL, Bushcraft, Backup, Hunting, Hiking/Camping  KNIFE 

New for 2020!




New for 2020 is the Extrema Ratio SETHLANS Survival Knife. All I can say is WOW!

Extrema Ratio have combined their knowhow for safe carry system  and dependable and functional knife design, into a truly transportable new product, the Extrema Ratio SETHLANS was designed in collaboration with  Daniele Dal Canto Master Advanced Instructor at FISSS** in Italy.


This a bit of a departure from the usual straight out and out military concept.

The carry system is based around a Molle configuration which allows many many transport configurations such as, for example but only limited to one's imagination:

On the regular belt carry, on the pack (non-Molle) on the Molle pack/vest/belt,  tactical belt and the list goes on.


Quality Accessories Included
Included fire steel and sharpening Ceramic stone and Diamond plate

QualityAlloyed Fire steel Included!
Included with the Sethlans is a quality high grit size ceramic stone (Extrema Ratio do not state the "grit size" but I would say it is over 2000 easily. To offer a comparison, I purchased a Fälkniven stone a while back and it cost me 37 bucks (whoops I don't mention price! but) I have to say I thought it was a bit pricey and it was only a few millimetres thick!; glued to a cheaper coarser synthetic; at least here included with my ER Sethlans, this sharpening stone  this is a good 5mm, just the ceramic plate; which is less likely to break in the field and should last a very long time!
A Coarse/medium grade Diamond coated plate is included on the reverse side! Again they do not state the diamond particle size but certainly it cuts but it's not too rough and the diamonds look to be well bonded to the plate as apposed to those cheap and nasty shiny plates covered in chrome and few diamonds LOL and very poor bonding!


Included in the Extrema Ratio Sethlans (survival kit) is also a large quality alloy fire steel. Take note, I say quality fire steel because "fire steels" (ferro cerium rods)  are not all made alike when it comes to the alloying compositions. Some steels, one needs excessive pressure, in order to even faintly achieve any sparks from it, or it must be struck with such violence creating unnecessary friction in order for the alloy to ignite.  However, for a quality steel, one just has to look at it for it to "throw sparks"! The fire steel which comes with the Extrema Ratio Sethlans is such a steel (u will see this in the upcoming video). 


I added a small piece of plastic to stop the diamond plate from abrading the Molle pouch (It's not really necessary but I'm a bit crazy with this sort of stuff LOL!)


The Molle system is built around a sturdily constructed Kydex scabbard which securely and safely stores the business end of things. Needless to say, the whole carry system can be striped down to the individual components, namely, the Kydex unit; the rear Molle straps and loop, the front pocket and finally a Malice clip to secure the small front pouch. The whole thing can be reversed for left hand extraction.


The whole "system" of the Extrema Ratio Sethlans comprises of the following: One knife (my model made with Böhler's N690 (uncoated blade- there is a coated D2 version, HRC 60 and Teflon coated with what Extrema Ratio are calling "EXP DARK"); an excellent super fine ceramic stone (as mentioned above) bonded to a coarse diamond plate and a big chunky fire steel which is held in place via 3 ballistic nylon webbing loops. 

Finishing off the Sethlans Knife system is a piece of included paracord, which is designed to tie into both the Molle skeleton and the Kydex scabbard (of course one can put their own cordage/length here). 



Mountain camping with the Extrema Ratio Sethlans

Why is the handle slightly curved?

The handle is curved to make using the knife more comfortable to cut with. When the blade is held in a horizontal position, one's elbow is down. If you hold a knife and the handle is regularly straight and the blade is held horizontally, your elbow will be at a higher angle, try it. The higher the angle of the elbow, the more this becomes unnatural. Nothing has been left to chance with the design of the Sethlans, including the handle design. Trust me, these things do make a difference when using ANY TOOL over long periods of time. For an example: I would use the construction of a shovel and its handle. There are shovels comfortable to use all day digging holes and there are ones which will break your back in a short time of use.

It was clear from when laid eyes upon this system, a lot of serious thought has gone into the design of the Sethlans.

Why do I refer to the Sethlans as a SYSTEM?

All too many knife manufacturers skimp when it comes to knife carry systems. I can say, based upon 35 years plus outdoor experience (10 years experience carrying and using Extrema Ratio products) in the field (not the bedroom or desktop or garage or shed), this is definitely not one of those companies. I have never had a scabbard fail on me, even under the most harsh conditions in the Australian wilderness, nor Northern hemisphere adventures either (not to leave out the North!). No stitching has ever come undone, no webbing abraded through, no FRN cracked, no press studs coming loose, buckles breaking, etc. The parts are made in Europe.

The "System" of the SETHLANS



The KNIFE

  The Extrema Ratio Sethlans can be described as a drop point (possibly the most useful design when it comes to outdoor/survival knives (Im not talking about machetes here or parangs ok or even tanto blades also easily maintained-see below). The tang is a big chunky 6mm (1/4") thick slab of N690 Cobalt tool steel. But wait there's more! No, the knife is NOT heavy in the  handle and that's because they have engineered a fuller within the grip!



The Sethlans' chunky tang is 6mm (1/4") thick, although there is a "Fuller" within the handle to keep the weight down. Do not be concerned with strength, as the handle is more than strong enough^^ for the most rigorous tasks for such a knife. The G10 scales are milled to fit precisely into the Fuller. These scales will also (just like for any good  liner lock folder) also provide some mechanical strength. But this knife has been designed to be used without the scales as well and it can be "cord wrapped" for those who like this minimalist approach (hence the slotted milled sections to help maintain an effective wrapping weave). 

The weight distribution is such that the knife does not weigh heavy in the hand (in fact the fulcrum point sits behind the ricasso!). This is a very important consideration for extended periods of use, such as: skinning medium to large game, working wood and food preparation. WHY? Because the sole purpose of a knife is to cut and if unnecessary energy is put into simply supporting a knife in one's hand/wrist, then this amounts to wasted energy. You may be reading this and thinking: "What a load of rubbish"! However, I would ask you to consider the following: A huge (and proven countless times both via anecdotal and scientific evidence) difference can be seen in the distance someone can travel (all other things being equal) on the weight of the footwear one wears. Hence the outdoor shoe industry, (good shoes/boot makers) strive to produce products which are light weight but sturdy enough for the intended task/s. Many of you will have seen I like to wear "Approach" type boots (over both hemispheres, from alpine*** to jungle). These are relatively lightweight, sturdy, fast and durable/tough; much the same can be said of the Extrema Ratio Sethlans in its design rationale.

The scales do not form part of the retention system and hence can be removed  as mentioned above without affecting the safe carry of this knife.

I noted there was a generous coating of oil over the entire tang when I removed the scales. Take note here that despite the excellent corrosion resistance of N690 at HRC 58, to seawater, it is NOT corrosion proof, so like all good users, we should indeed carry out maintenance checks once in a while should the knife get submerged. My field experience tells me however, that unless the knife gets a good dunking in the sea, then just letting it dry in a warm place should be fine without the need every time to remove the scales. On that note the scales can be easily removed with an ordinary flat bladed screw driver.


The blade geometry and edge quality is such that typical camp activities can be easily achieved. The Extrema Ratio Sethlans is not thick around the edge so getting shallow angles for feathering is easy.


The first fixing bolt hole sits way back from the ricasso and that is important from the perspective of NOT putting holes close to the point of a fulcrum (if indeed the knife be subject to such forces) so as not to provide a point of potential failure- just like in aircraft design, bending forces are not occurring around, or close to holes. (Yes, that's right, that's why on other Extrema Ratio models the handle fixing bolt is not where near the guard)



Getting close to nature is what it is ALL about!

The scales of the Sethlans are made with black G10 composite. It goes without saying G10 is super strong and basically doesn't absorb water, unlike micarta composites. G10 is the industry standard when it comes to high mechanical strength and high dielectric breakdown (ok the latter quality isn't important here LOL)

To Strike or not to Strike?

If you are going to include a fire steel then you had better make sure at least part of the spine is acute enough to strike a steel, should you require this method in order to light a fire. Sure, a steel can be struck with a piece of broken quartz or glass or any sharp and relatively hard (at least 7 on MOHs scale of hardness) material with a good edge. Yes, the Extrema Ratio Sethlans does indeed feature an acute edge on part of its spine. Many people have complained that ER do not make spines that a fire steel can be struck against. Of course they don't they make predominantly military tools and no one is striking fire steels. Now they address this "social media request/complaint"

There is well-placed gimping and an acute edged spine.


Thumb/forefinger (on the top of the knife), rear top and underside surfaces. There is a lanyard hole which can accommodate either webbing (such as climber's webbing) or cords with a diameter of up to 4-5mm.

The handle is slightly curved for ergonomic comfort and "cutaway" around the index and middle finger as in their other models, to provide a secure non-slip grip.


Despite having a 1/4" (6mm) thick spine At its maximum width, the Sethlans blade geometry has been milled in such a way as to provide maximum cutting efficiency, yet sturdy construction and there is also a swedge near the tip.


The Extrema Ratio Sethlans is comfortable to use in the ungloved hand and the forefinger/thumb gimping is grippy but not uncomfortable, due to its profile.

Make a fire, prepare food,  (or prepare food make a fire) cook, that's what interests me. These things can be easily achieved with the Sethlans. I wouldn't necessarily take it camping in the tropics (read my other blogs about why that would be based upon extensive camping in the tropics) but outside of the tropics, no problems.

The Scabbard setup


Note where my thumb is pointing, one can see where the G10 has been milled in such a way as to provide a pathway for any water (should the knife get submerged) to drain away from. 
Underside rear (little finger) gimping helps to provide a solid no slip grip.
Having a slot for the "lanyard hole" (slot) Not just cords can be used for a lanyard but also tapes and or webbing such as climber's tapes (very strong, very useful)



Double press stud retention strap however, it is not needed unless to secure the knife completely, as the kydex sheath securely locks the Sethlans in place. Although I ALWAYS use a retention strap when moving through the bush and then there is ZERO chance of losing your  knife.


Extrema Ratio really address the issues with the "survival" knife thing. It's no good carrying a supposed survival knife/bushcraft/Backup Knife if you are not carrying anything to keep it sharp and it's no good carrying the same said type knife if the scabbard is the weak point as any knife will become a potential danger to the wearer should the scabbard fail and the knife inflicts an injury to the wearer. 

The Extrema Ratio Sethlans is securely retained via a no rattle Kydex moulding and further security via a left or right handed double press stud 40mm wide strap.

As mentioned, the whole carry system can be disassembled and the kydex unit reversed for left handed carry. Extrema Ratio are also providing as options a belt clip for horizontal carry for the Sethlans as well!




It came with that bit of paracord but there is no reason why a longer piece could not be attached in the same way. Remember there are options available for horizontal belt carry. Personally, I do not find this anything additional, it's bit of cord at the end of the day.


Why a Drop Point? (because why reinvent the wheel when it comes to functional blade designs)

I've talked about this many many times and that is on the subject of blade shapes, specifically useful ones. There is a plethora of blade shapes out there but to qualify as a "Tool" (hence my channel name- BushCampingTools) then it has to come under the banner of being a useful tool. The "Drop Point" blade design is of course undisputedly such a tool. 


A drop point has enough of a tip for penetration tasks (gutting, skinning etc.), simply maintained in the field (kept sharp), easily able to skin game and cut meat and other raw or cooked food items. I'm not saying there are no other useful blade shapes, of course there are, however, the drop point, or variations of this shape can be very useful tools. There are more easily maintained knife shapes, such as the Tanto and or modified Tanto or blades resembling Japanese Wakazashi; I have spoken and written about these latter designs elsewhere and on this blog. Some people have complained saying "it's just a drop point", well of course it is, as mentioned, the "Drop Point" like the ordinary triangular bicycle frame is to the bicycling industry LOL!


The Sethlans can be used for hunting (in my bowhunting experience) without any doubts in my mind, so the Extrema Ratio Sethlans  should also appeal to the hunter. We regularly walked many kilometres into virgin rugged cliff based bushland hunting wild goats and one must go totally self supporting should the situation involve any delays in returning to camp. In reality, the Sethlands, isn't too heavy or long to cart around, on the waist or strapped to a pack (I always carry a pack hunting). 


In terms of "survival" (it that's your thing) then the greater the probability you will be carrying some item the greater the probability you will also have it on you during a situation should any unscheduled incidents occur and you await rescue, that's all I'm going say here on that subject

The Extrema Ratio Sethlans is a knife that will also appeal to those in countries (like for example some countries within Europe) where the law can be harsh on knife carry since this knife does not appear threatening in design and can be clearly seen to be a tool of the hiker and camper. The Extrema Ratio Sethlans can be easily taken hiking and camping, as food preparation is also easily achieved without embarrassment of pulling out some 9 inch chopper among other campers to prepare your evening meal! I also think this would be a great knife for extended hunting trips away from vehicle and comfort amenities (such as cabins or huts), simply camping out and hunting, for example Bow hunting (based upon personal experience).

As with all of their products (I own and have tested), they are built with Italian pride in manufacturing.


^^HOW STRONG IS IT?

Now a quick demo for those who think the handle isn't strong (I noticed lots of comments after they saw the trailer videos. But first to say: this handle strength thing is only of relevance to those who don't want a knife to cut with but only to fool around with and of course stand a high chance of breaking it unless it's a "crowbar"/ "pry bar" LOL and crowbars don't cut very well and are heavy to carry. I have in 35 years, never seen or heard of anyone breaking a handle of even the most cheap crap knife (unless trying to break it or it was faulty to begin with).

 So now to the basic strength test, this is my now 72Kg weight (yep I've lost weight, I was getting too fat LOL from close to 80Kg!!) plus another 500gm for the shoes across the knife at the fulcrum-or close to it. No chance of breaking it horizontally and the design from the vertical loading aspect is that of a bridge. Ok? yep one big "triangle" (in the design of the fuller).




Do not try to do this! My foot is raised a bit because I'm now balancing upon one foot LOL!- cardboard  and wood block to protect the knife edge against the blocks of granite. Three times, I performed this and no strike 3!


Stick around fo the upcoming field review of the Extrema Ratio Sethlans.

BCT


** FISSS- Italian Federation of Sports and Experimental Survival


http://www.fisss.it/

*** Ok you have not yet seen me wearing my mountaineering boots and crampons LOL-specifically for snow and ice only in reality and or prolonged sub zero temperatures.

All images BushCampingTools