FEATURE ARTICLE!!!
GUEST REVIEWER: SWITCHBLADE
REVIEWING THE KIZLYAR SUPREME FIXED BLADE STURM! An EXCELLENT Review!
Kizlyar Supreme, Sturm
Kizlyar Supreme is a relatively new Russian knife manufacturing company, based in Saint Petersburg, Russia.
Their international team have started to work and design their lines in 2009 and finally entered the knife market in December 2011 simultaneously in Australia, Germany and Russia. Today they have a wide variety of knives on their palette and the offerings are growing and improving every year in leaps and bounds. They offer a lifetime manufacturer's warranty on all of their models. This warranty covers any and all defects in workmanship, build quality and materials used.
The name Kizlyar comes from a town of the same name in the Dagestan region of Russia, which is famed for its knives and knife-making traditions.
Specifications:
Steel: Japanese AUS-8 stainless steel @ HRC 58-59
Overall length: 252mm
Blade length: 118mm
Blade width: 31mm (at the widest)
Blade thickness: 4.3mm
Weight: 215g (+ the sheath is another 90g )
About the steel:
It is manufactured by Aichi Foundry in Japan. This tried and true steel is fairly easy to sharpen, takes a keen edge and generally low cost with great corrosion resistance. It has excellent toughness and good edge holding capabilities and it is a good compromise for a knife-blade material. And because of that, it is being used by a good number of companies for their mid-range line of knives.
Composition of the AUS-8 stainless steel:
Carbon: 0.7-08%
Manganese: 0.5%
Chromium: 13-14%
Molybdenum: 0.1-03%
Vanadium: 0.1-0.26%
Nickel: 0.5%
Phosphorus: 0.02-0.025%
Sulfur: 0.02%
Overall impressions:
This model comes in a sturdy cardboard box with the warranty card and some silica gel inside as well. The warranty card could use some larger lettering, because the present version is really hard to see and read...
The knife feels good in the hand and has a nice heft to it, although a bit handle heavy. It was sharp and able to shave arm hair right out of the box. The fit and finish was very nice all around. No grind marks, gaps, imperfections or anything like that. The medium sized Sturm model is a full, broad tang construction and has a drop point, saber grind blade with a secondary bevel, a little ricasso and some jimping on the spine. This spine is not really square and sharp enough to be used for scraping or with a ferrocerium rod, except a short (about an inch/2.5cm) section around the tip.
The Sturm shares its handle design and material with Kizlyar Supreme's “Tactical Echelon” series knives.
The nicely shaped Kraton/over hard ABS handle slabs are fastened with two Allen screws per side. The handle has a finger groove and a pronounced finger guard at the front and also there is a lanyard hole at the butt of the knife. This handle provides a very comfortable and secure grip. To illustrate this, let us see some in hand photos without gloves...
… and with gloves, as well.
The universal “Supreme Platform” (SP) sheath made out of lightweight Kydex. It is MOLLE compatible and gives a lot of ways and angles to carry, mount or attach the knife to belts, backpacks, PFD's, LBE's or any other equipment. This sheath has 3 drainage holes at the bottom and the design of the mouth facilitates the one handed draw of the blade. There is no movement or rattling at all while the knife is sheathed. It is a tight fitting,very secure sheath, indeed. No worries about losing the knife from this sheath... Here are some pictures to show the knife sheathed...
… from the side...
… and unsheathed.
Practical use:
I have been using this knife extensively for over two and a half months now for all kinds of tasks and tests, out of doors and around the house. I grouped my observations and experiences in categories by field of use, rather than in a chronological order and I would like to share them here with everyone who is interested.
Cutting, slicing:
As usual in this part of my test regime, I tried to get and use as many different materials as possible for cutting subjects in order to get a good idea about the potential and capabilities of the given knife.
Let me start with some fibrous stuff, like this 20mm wide nylon webbing...
… and a wider, tightly woven strap...
… another, 25mm wide variety...
… then one more different kind.
Staying with the fibrous category here is a kernmantle type rope...
… followed by braided polypropylene ...
… another kernmantle rope ...
… and a 6mm nylon version.
Next is the group of plastic materials in the form of linoleum welding PVC cord...
… and some thick walled and very hard PVC pipe ...
… then another, softer kind of PVC hose...
… finally, a piece of somewhat flexible, but still hard electrical core-line.
For rubbery materials I have used fiber reinforced and double walled pneumatic hoses in two different diameters.
Sliced up some thin scrap leather, as well.
To round out this section I decided to use something a bit out of the norm...
The Sturm performed well in all of these tests, without difficulties.
Woodwork and field use:
I think, perhaps this is the most important domain for an outdoor/survival knife, such as this blade.
It is a useful skill for fire-making to be able to produce nice, good feather-sticks and shavings and this is also a good practice to get a feel of the given blade. I for one, like to do it just for the fun of it, too.
So, let us see some nice feather-sticks, which I was able to produce in different kinds of wood...
… and here is a sizable pile of shavings.
In my opinion, another important part of fire-making is wood splitting or batoning. This comes handy for example to get the dry inside of otherwise wet or moist wood for fire making. But it is useful for a number of other purposes, as well.
Here is a photo collage of this chore performed by the Sturm model.
Still on the fire-preparation subject, next is a shot of my Firebox, all prepared and ready to go, courtesy of the Sturm and a folding saw.
The knife had no problem and proved to be a decent wood splitter. As long, as it spans the piece of wood across, it is good to go. But keep it within reason and do not go overboard trying to split oversized logs....
To test the strength of the blade tip I did some stabbing, digging and prying in some big, dead logs with no ill effects to the blade.
Also, tried a little drilling with the tip of the blade. I can report, that this model has a strong and robust tip.
Then I have tried this knife at some whittling, too.
I had no problem cleanly slice this dry branch...
… or to make a few different notches...
… a point (like a needle) on a stick...
… and carve a tent/tarp peg.
Harvested and processed some nice fatwood...
… and used the spine near the tip of the blade (where it is sharp and square enough) to create some very fine scrapings.
This part of the blade works fairly well with a ferrocerium rod, as well.
The knife did an admirable job in the woods and had no problems with any of these tasks.
Food preparation:
I left this important field for last, but not least.
Although, obviously this is not intended to be the primary field of use for this blade, it still does a decent job if it is pressed into kitchen service or camp cooking. The stainless steel and synthetic handle is a definite advantage here and despite the fairly thick blade, the high saber grind does a good job. I took a few pictures of some of these assignments. Slicing a lemon and an apple in half...
… cubing potatoes...
… slicing up vegetables...
… tomatoes and peppers...
… sausages and mushrooms.
And a shot of an outdoor “cookery” and picnic.
Final thoughts:
Kizlyar Supreme's Sturm model performed well in each field. This is a solid, well built and beefy knife in a useful medium size. It can take some abuse, no problem. It suffered no damages during my testing procedures and usage, except some minor surface scratches, which is normal wear and tear. I like the well designed sheath, the shape and feel of the handle. This Kraton handle provides a secure grip wet or dry and minimizes felt vibration while batoning or light chopping.
By the way, I would not bother chopping too much with this blade. It lacks the necessary length and weight to be efficiently utilized for that. Of course it can do light chopping, like delimbing or cutting a sapling, etc... Edge retention lives up to the Japanese AUS-8 steel. I have used my Spyderco Sharpmaker and a charged leather strop a few times in order to maintain the original sharpness. Since the blade is stainless steel, the handle and the sheath is synthetic, the general maintenance of the knife is a breeze. This AUS-8 steel is adequate for the intended purpose of the knife and to keep costs down, but it would be nice to see an upgraded option of this model as well. I believe the company is in the testing process of some high end powder metallurgy steel version at the time of this writing... Let me mention here, that the company offers a green coloured version (handle and sheath) of this Sturm model, as well. Another thing I have noticed is some visible “wear and tear” on both sides of the Kraton handle, right in front of the finger grooves. Most likely it is from the friction of repeated sheathing and unsheathing of the knife. It looks to be just a cosmetic “damage” and of course it is not going to wreck or alter the handle slabs, but it is definitely something worth to keep an eye on.
Is there anything to improve upon this knife? Other than the aforementioned steel upgrade, in my opinion the balance point of the knife could be made even better by using a tapered tang in the handle portion of the knife, which would not affect the integrity of the full broad tang construction (like some cut-outs could...) and this would shave off some weight as well.
All in all, I am happy with this knife and in my opinion the Sturm model is a “Jack of all trades”
and as such, it would serve well as a general hiking/hunting/outdoor belt knife and it will make a good survival/tactical blade (including military/law enforcement/SAR use) as well.
Thanks for reading!
Switchblade
