Reximex THRONE PCP Quick tour

 Reximex THRONE PCP quick tour

Ok, so I spent quite a bit of time researching PCP rifles and finally after some months of research, I settled upon the REXIMEX THRONE 0.22cal PCP. 

Now I will tell you in detail why I selected this rifle over the bazillion of models out there. Firstly, this is not going to be some tech head gunsmith article, so don't worry here, secondly this will be one of many articles on this subject i hope to bring to you both here and on the channel bushCampingTools.

The first thing, is that I want to clear up any confusion out there as to Reximex and King arms otherwise known as KRAL Arms, These are not the same company and are located quite some distance away from one another in Turkey. However, I believe the owner of Reximex is the son of the late owner of Kral arms. The map below shows the location of REXIMEX (White heart shaped marker) and KRAL Arms (marked as King Hunting). It doesn't take long if one searches for Turkish arms manufacturers you will find many such companies within Turkey.

Image courtesy of Google maps

Rifle Aesthetics of the REXIMEX THRONE PCP

There was no doubt in my mind when it comes to aesthetics, Turkish produced fire arms look really nice. Famed for the use of Turkish walnut in stock production and attention to detail, in fact not only that but Turkey exports walnut to many countries, as this dark wood appeals to many in the gun and knife manufacturing trade as well as cabinet makers world wide.

The REXIMEX THRONE whilst not made with a walnut stock is none the less of aesthetic design with clean lines, smooth comfortable corners featuring a synthetic, steel and aluminium construction throughout. The company states that they are using both Turkish and Italian produced metal alloys and that there is much CNC going on with production. In fact all of the metal parts, in particular the receiver construction I found to be very well machined (why wouldn't it? as the cnc mill only does what the programmer instructs it to do, so the design from both aesthetics and functionality are the critical step here (and in any cnc produced device for that matter). With the exception of the Mil std rails there are no "uncomfortable" protrusions upon this weapon.

There are many PCPs out there, maybe even more models than conventional firearms? Generally, I've found but not without exception, European* produced  PCPs to  be not only functional but aesthetic as well (if this is important to you).

On this note, many PCPs also look like they came out of a "Meccano"** factory and if you are not familiar with this analogy then they look like they resulted from a rushed design with no thought to comfort and only had "cheapness" in mind. I should say there may be no relationship between function and aesthetics when it comes to firearms. But let's face it if you are to spend good money on such purchases then better to buy something you could not have made on the school cnc mill and with a half baked design program, don't you reckon? 

For example: simple design features like having a proper butt, not made as a straight line because no one's shoulder in the human race is flat; all of these PCP's that feature a flat piece of metal terminating the stock, clearly indicate regions of cost cutting in production and little thought to long time usage IMHO. And just because something is SWISS made doesn't mean it has to be aesthetic (although a Swiss friend of mine once said when I asked her if there were any shit made Swiss products, she said without hesitation but with a little laugh; NO!

The butt end of the REXIMEX THRONE is made of a comfortable hardness rubber (and adjustable-up and down-however no angle adjustment)

More on this subject later!

Did REXIMEX copy the Swiss made FX?

Well one only has to look at the two rifles side by side to see that the obvious answer is NO. They don't look anything like each other, it's like saying Yamaha bikes are copies of Honda!

** No offence to Meccano-I still love the stuff even as an adult, although they could bring back more open ended kits.

(Turkey is not classified as being within Europe but borders with South Eastern European countries)

If you have travelled these regions you will have noticed similarities amongst the cultures.

The REXIMEX THRONE comes under the design of a "Bullpup" configuration, ie the action is behind the trigger, hence one can have the same length barrel as a regular rifle but in a shorter more manoeuvrable design.

External indicators

There are are two mini manometer gauges on the Reximex THRONE; one for tank pressure (0-300Bar)  and one for the regulator (0-250 Bar). My only gripe is that the high pressure gauge could have been more carefully designed so that when the gun is horizontal the gauge marking are also horizontal, although this is not really a problem as what's important is that the gauges read accurately.

Such gauges could easily be replaced with digital gauges. the bodies are metal, as to what sort of metal it is not possible to tell until the paint gets chipped off, but tey feel sturdy enough, time will tell.

The above picture shows my only genuine gripe and whilst it in no way reflects the operation of the firearm, it clearly got past QC (ie the grind/scratch mark on the trigger safety). I do not believe i'm being picky either. The trigger safety mechanism was clearly damaged during manufacture (only cosmetic) and installed regardless. This is NOT a cheapo rifle and for a new company (2015 inception) trying to get out there. (note the trigger can be easily adjusted up or down, left or right by the loosening of a small allen bolt on he trigger shaft).

One of the deciding factors for me in the purchase of the Reximex THRONE was what we can see in the above image. and I don't mean the tape measure LOL!

The design of many PCPs, the barrels, no matter what are their lengths are only held captive by a very small amount of metal prior to the magazine and injector assembly. This to me is a big big design fault but also a result of cutting production corners to keep costs down at the expense of possible loss in accuracy and or a big big potential site for accidental damage to the barrel and or change of alignment. Ok how the heck do I come to these conclusions? Having a long piece of metal protruding from just a small piece of metal, the longer pice acts as a lever. One slight bang on that lever and this will put undue strain upon the mounting region of the barrel. no rifle is built like this, at least no good rifle that's for sure. Ok so one is not supposed to accidentally bang or bump the barrel of a gun but it can happen. i guess if you are only going to the range and carrying your PCP around like it is made of glass then ok, this will not be of any issue.

Now the barrel of the REXIMIX THRONE travels through a very hefty and rigid receiver and then locked in place at the rear of the gun (see image below showing the barrel unlocking screw knob). This is an important feature for me and I believe accounts for the consistent results shooters are getting from the THRONE, because the barrel is secured very rigidly within the frame/body of the rifle. Instead of having 58 cm sticking out of the receiver body, the barrel is instead held rigidly captive and less subjected to variations of temperature change/vibration, etc. during extensive firing and handling long term. 

BTW not all Bullpup PCP designs have their barrels so securely mounted as the REXIMEX THRONE. You can see this (the barrel mounting) on more expensive brands.

Features (for me) at a glance:

Hefty feel of robustness,(it's not a lightweight gun weighing in at 3.75 Kg, so basically after about 1km of waking this equates to 4kgs in my book LOL!.

Fully shrouded barrel (past the receiver), the barrel BTW is nicely blued. The REXIMEX THRONE also features a built in sound moderator (as part of the shroud-which BTW is metal) and came with an air stripper fitted!

All graphics are LASER engraved into the Aluminium body.

Serial number and calibre is clearly LASER engraved upon the receiver. Here in the above image you can clearly see the plastic covering over the barrel. this plastic feels really strong and as i said later on, it does not feel flimsy at all.

The cocking lever came for right hand use but can be changed over for left handed cocking: here is a link to a video where a you tuber shows how to accomplish this.

Note all of the exterior bolts are of the more  professional socket head design and hence less likely to be stripped like a flat head or Phillips head configuration. Note just in case one forgets, in big white (actually it's the silver color of raw Al) letters is a reminder of the maximum working pressure of the tank!!

The top Picatinny rail (MIL-STD-1913) features both 11 and 22mm dimensions, the lower rail is only 22mm.

What this means basically you could fit anything to the THRONE.

A 6.5" lower Picatinny rail is fitted, the newer THRONE Gen 2 features a much smaller rail in this position (according to the media blurb on REXIMEX's web site).

The safety mechanism is part of the guard and is intuitive to use. Speaking of the guard, the whole machining of the receiver/guard etc is very sturdy looking.

The included carry case was the only negative. It is sort of a Pelican case copy and like so many other manufacturers they can only copy but not duplicate the excellent construction and durability of the Pelican case for which pelican reigns supreme IMHO based upon over 20 years experience travelling the globe using Pelican cases.

The case for the THRONE is way too big as well IMHO and only possibly suited for air travel but certainly too big to chuck in the truck or car and travel to some range or hunting site. I mean I could probably put my compound in the case at the same time LOL. Also the hinge pins can easily come out?? What the heck? Also my case was missing one cir-clip off one of the transport wheel's axel. While this is certainly no disaster, it is a slight black mark. 

But heck I'm really only interested in their gun making skills because if one wants a good case you go to a specific case manufacturers like Pelican.

Ok but  the inclusion of a hard case is great and don't get me wrong I'm not complaining but hey they could have thought this out a bit better. As to where the case is made, I will ask them but my guess is China?

More on this later. 

The REXIMIX THRONE comes with a very large carry case. It's 50 inches long! (I guess if one decides to put on an aftermarket moderator and leave it on; a big riflescope and carry other items, the case can soon be filled out.)

The filling port comes with a nicely fitting protective cap to keep out dirt and dust.

All text is LASER engraved.

Power adjustment, ie "hammer adjuster"

Pellet pusher, showing the region to place the pellet pusher removal tool if one wants to change barrel calibre. Also shown is the "Transfer port" adjuster screw, this essentially can either restrict the degree of air entering the barrel. (here seen set at a maximum). This Reximex throne BTW is the Version 2 as version one did not include a transfer port adjustment.

Here are the specifications at a glance:

 Caliber: 4.5 mm 177 cal / 5.5 mm 22 cal / 6.35 mm 25 cal
 Barrel Length: 58cm / 22.8"
 Tube Air Volume: 200 Bar / 425cc
 Overall Length: 87.5cm / 34.4"
 Trigger Distance: 37.5cm / 14.7"
 Stock: Synthetic
 Weight: 3.75 kg
 Magazine Capacity: 14 shots 4,5 mm / 12 shots 5,5 mm / 10     shots 6,35 mm.

What about the weight distribution and does this matter for such a short rifle configuration?

The weight distribution centres around the middle of the guard (note I checked this when my bottle was only just under half full but since this is such a small bottle i do not believe a full bottle would change the weight distribution much at all.

Included in the box came the following items:

Spare O-rings

X1 large Allen wrench to remove the lower grip to access the trigger adjustment.

X1 filler quick release (brass construction).

X2 plastic construction  0.22cal magazines.

X1 Instruction booklet which also contains  a full parts list. For the parts list one will need "microscope eyes" in order to read what these parts are and REXIMEX could have done a better job here as the manual, although very brief, does in fact describe how to basically partially strip the weapon for safe adjustment of the regulator pressure setting and also demonstrates how to change out the barrel for a different calibre (my gun did not come with the special tool require to remove the pusher but this could be easily rectified). Although this latter point might only be relevant for the newer THRONE Gen 2?

The images of the parts are just way too small and the actual O-ring sizes are not given, which is a bit of a pain because these will be the first thing to fail in any PCP. I will endeavour to measure them accurately and post the actual sizes here at a later date.

Thus the instruction booklet is very brief and most of it concentrates (as one might expect) upon safety issues should instructions not be followed to the letter. As a note to myself, just for the heck of it, I might rewrite the manual.

What is on the REXIMEX site?

Is it still available and or supported by REXIMEX? I do not know, all I know is (and I am awaiting confirmation here from REXIMEX) that my gun shop said it only had a 6 months warranty, this seemed kind of short to me?

The Reximex THRONE no longer appears on the current REXIMEX website  (THRONE Gen 2 is supposed to be coming out???) although many dealers/retailers still have the THRONE  for sale. It did come out around 2020? and it would be nice to see some details about it on their current website. There appears to be a growing strong following worldwide of the THRONE, this does not surprise me at all. It was the first THRONE model sold by my gun shop.

There is NOTHING flimsy about the THRONE and it appears to be very user friendly. Note for the THRONE  Gen 2, they changed the "spoon" type lever action for a more "Biathlon rifle" type lever. For me personally this is not a problem as it is on the THRONE.

Anyway, once I've got my sights zeroed in and taken out for some shooting, i'll get back to you all.

The REXIMEX THRONE was supposedly also available in some sort of "Skull patterns"over everything except the receiver, it looks cool but also looks yobbo-ish at the same time. Pro matt black is the choice. 

I'm using a foot pump for portability although those pumps are hardly light weight LOL! Plus I will think of a more convenient way to transport the REXIMEX THRONE nationally as the "crate" it came with is really only suitable for air travel I believe.

Finally, sorry for the crap photos, not my usual style but very excited to get this overview out here. i know the gun has been on the market for a year now and that length of time has enabled many before me to post stuff about it independently on one another and given me a wealth of info to go on. As I said there is a plethora of PCP rifles out within the light calibre ranges such as .177 to .22 and also within the more heavier calibre models out there. Where to start????

Eye candy

BCT