Zentron Outdoor Zentron L1 LASER RANGE FINDER WITH BALLISTIC CALCULATOR

 Zentron Outdoor Zentron L1 LASER RANGEFINDER WITH BALLISTIC CALCULATOR

ZentronOutdoor produce the L1,  a compact, multi-mountable  LASER range finder. The Zentron L1 can be easily mounted to your scope of choice. For example: a 30mm diameter Rifle scope tube.

 It can also be mounted to their own Q635 Thermal Imager,

the Zen Q635 using the bracket/cradle  shown below.

All mounting hardware is included, there is nothing else to buy, plus there is also supplied spare rubber protective material for the mounts.

Ballistic calculator (mob app) for a myriad of customisable caliber/projectiles (see below).

The Zentron L1 LASER RANGEFINDER takes the same battery as their ZenQ635 Thermal Imager, ie their CR123A.

There is an O-ring weather seal

The rifle scope mount attaches via a 2.5mm hex Allen key wrench or a TORX T10,  The same wrench size also affixes the  L1 in it's clamp/cradle.

The rubberised gripping material provides a lot of friction and when mounting the L1 within it's "cradle", (see below) requires that you carefully align it within the cradle because it is very difficult to turn against this material once it is fully inserted, even when the clamping screws are loose. This is actually a good thing since the clamping system is very secure.  

The rifle clamp

can be left on the scope and the Zentron L1 simply attached to the scope anytime via thumb screw mount. (above image)

 Operation of the L1 is via a single rubberised button and is super easy. Once connected, the operation manual can be either viewed or downloaded to your mobile device.

Long press to turn on, short press to activate the measuring capabilities. Long press to turn off. To active the visible laser system (RED), the button is pressed X3 quickly (note LASER will automatically turn off after 3 sec. Double tap the power button to switch display style.

Downloadable full operating instructions online via the Zen Link app.

The L1 boasts an accuracy of +/- 2m. out to 1200m!

Rifle scope mounting ring shown above. Note protective material lining the scope ring clamp.

The unit of course can also be used as a hand held device if necessary, although there are specific models for this application, the IR monoculars (Models M4 and M6).

The Zentron L1 is fast to respond and dead easy to mount and use.

Checkout ZentronOutdoor's thermal imagers, are super sensitive: 

More  @BushCampingTools

BCT