FKMD RIMOR FX-9CM07 SURVIVAL Multi-Purpose BIG KNIFE

FKMD RIMOR FX-9CM07 OD

FOX Knives Maniago Italy.

FKMD FX-9CM07 OD RIMOR Knife- In the field

The FKMD RIMOR  (FX-9CM07 OD)
(OD= Olive Drab referring to color of the grip) there is also the stone wash version see here: or see the black Idroglider version here:

The FKMD RIMOR rocks! (The name RIMOR comes from the Latin, roughly translating: "Explorer"). Now I'm going to tell you why I think the FKMD RIMOR rocks!

Hacking into seasoned hardwoods with the FX-9CM07 OD RIMOR isn't a problem because the weight distribution is spot on!

Idroglider coating makes good sense on a knife that 6mm thick. It's no good if you stick a knife into something and you have to apply a crazy force to retrieve it. For example into springy hardwoods.

Firstly, the design originates from the internal production team within Fox Knives. A large BUT not big, almost spear point, with a good belly starting approximately midway along the cutting edge. 

A slick design for a 17.5cm long blade. As you may know, this is in MHO, a great length for an outdoor knife outside of tropical regions.

The edge has been bevel ground and it is a large bevel, greater than 1mm. The overall lateral blade geometry is that of a sabre grind. 

Finger choil and thumb/forefinger gimping present. 

There are some added advantages (other than frictionless cutting ability) I believe for using Idroglider as a coating; it simply "feels better" against the fingers. The finger/thumb gimping is generous and well placed for non-slip intricate work.

The spine swedge starts approximately midway.

The spine swedge starts approximately 7mm past the  first letter "R" as in the Rimor

The usual 2 fixing bolts securing a fibre reinforced nylon  (FRN) handle which like many of their tactical designs, totally encompasses the tang. Therefore this knife can be used in ungloved hands at sub zero temperatures without fear of freezing one's paws onto an exposed tang. There is nothing to say about the tang strength either. Bast2a (of course this is Bastinelli!) proved unquestionably in his crazy video by running a large van over an angled FKMD knife (some 9 years ago) featuring the same tang and guess what? The knife did not break!

The fibre reinforced Nylon (FRN) composition FOX knives are using  for this handle, provides a very secure grip, even when swinging this hefty blade, wet or dry hands and good shock absorption.

The over moulded FRN grip is secured via 2 T15 Torx bolts. If the bolts are removed, the handle is still very hard to remove easily and I treat this as really a moulded grip with added security of the two bolts. Being a coated blade means little tang maintenance.

Blade coating and options

The coating on the FKMD RIMOR is Teflon based: known as "Idroglider". Idroglider is a proprietary name for a water based formula containing Teflon. Idroglider is a thermosetting compound made by the Italian company Mondial Color. I have many, many years experience with this material, when used as a coating on metal surfaces, such as knives. I can say without a doubt it can handle severe abuse, as in abrasion resistance and provides a very low friction surface. 

**Note however, no where on the Mondial site (the makers of Idroglider) does it suggest or otherwise indicate that Idroglider is a food safe product. I'm still waiting or them to get back to me with something here. if this is something which concerns you then better get the stoned washed model.

The FKMD FX-9CM07 OD has a Rockwell C of 58-60 what this means in practical terms is that cutting up dirty objects like these mushrooms, (grass, fibrous material, small stones, dirt, sticks etc) will not easily blunt the blade.

Realistic Cutting performance

The Idroglider coating and the deadly sharp edge of the FX-9CM07 OD made cutting these wild oyster mushrooms a breeze. To cut mushrooms without making a colossal mess, the knife mush be very sharp and the blade behind the cutting edge not too thick, otherwise there is too much drag; a good test of cutting performance in the real world, not this A4 paper cutting stuff, of which even blunt scissors can do, is to cut cleanly mushrooms! Ordinarily, there are special knives for cutting mushrooms. They have thinner blades than most but can such a large knife perform these tasks? Answer: YES!

Cutting wild oyster mushrooms, no problems even for such a big knife due to a good edge geometry.

Preparing to take loads of birch bark for fire starting material.

FKMD Rimor (FX-9CM07 OD) in the forest.

Böhler's N690 Corrosion Resistance at HRC58-60

So why coat a stainless steel blade like N690? Well despite being a stainless steel, Böhler's N690, will show signs of corrosion when subjected to saltwater and dirty fresh water for lengthy periods and whilst I have found this to be minimal and just surface discolouration, the coating with Idroglider totally prevents this from happening. The FKMD RIMOR FX-9CM07 OD is also offered as a "stone washed" finish and if one is never going to be constantly subjecting their knife to immersion, then I'd recommend the uncoated version-that is unless one wants to achieve a more "covert" anti-glare solution, and then certainly the non-reflecting Idroglider surface coating would then be one's choice.

Working in and around water is no problem for Böhler's N690 stainless steel and also added corrosion resistance from the Idroglider coating!

Remembering too that the higher the Rockwell hardness the less Chromium is available in solid solution for corrosion resistance and in this case FKMD/FOX Knives is producing  product with a final HRC of: 58-60.

The Idroglider finish compared with ceramic coatings, provides a better (IMHO) feeling and not as "rough" to touch. This may be obvious as it's a TEFLON coating and hence it will "feel good" to touch.

The FKMD RIMOR This knife immediately caught my attention immediately, simply because of the balance of the blade design.

There is an ever so slight curvature to the cutting edge. This curvature will always aid in cutting motion which describes an arc. The logic behind the scythe (albeit an exaggerated curvature compare to this knife). Since the curvature is only slight one can still cut  up things against a surface which isn't flat. let face it, you aren't going to chopping up food on a chopping board in the wilds but rather a fallen tree of which the profile will be slightly rounded. 

An ever so slight blade curvature can be seen here where i hold the knife upside down. This in fact can provide better cutting of objects on logs/branches etc and yet still afford good cutting of loose fibrous materials, such as grasses, reeds etc.

The FKMD RIMOR isn't too long. At 17.5cm blade length (as measured from the end of the grip to the knife tip, it fits into the "just right" length IMHO. Also because of the design, the actual cutting surface is also 17.5cm! (I measured it). 

17.5cm cutting surface! FKMD FX-9CM07 OD (Mushroom; edible Boletus!)

Not too big for the BBQ in the bush! FX-9CM07 OD

Often when manufacturers quote the blade length, this can be quite distinct from the actual cutting length (as is a shorter cutting length- not so here, which is great!).

Perfect knife balance is achieved at a fulcrum position from a vertical line passing through the ending of the spine gimping.
A line drawn from the tip to the middle of the lanyard hole basically passes through the centre of the handle for the maximum capacity to deliver power to the tip in a thrusting action.



Lashing points (3 in total)
The deep belly will work well in processing medium to large game with this knife. Since there is a swedge, the FKMD will be good for penetrative tasks, piercing hides, fish skin, penetrating plastics (flotsam jetsam).  An effective knife must have a good tip.

3 lashing points for extending cutting reach!

The FKMD FX-9CM07 OD RIMOR features plenty of pounding surface for using a baton if that is your desire.

Plenty of pounding surface area on the spine for use of a baton

Levering objects, as apposed to using a knife as a pry bar.

The FKMD Rimor sports the proven grip of so many of FOX cutlery/FKMD knife models, it needs no introduction. However, I will give a brief one for those who have yet to encounter it.
The grip is almost looks like it has been over moulded onto the tang but it hasn't. It is made via injection moulding and then affixed to the tang via two Torx head socket bolts. This type of grip simply fits the fingers in a generalised ergonomic design, ie there are finger and thumb indents where one's digits would naturally come to rest.

We now see the use of FRN (Fibreglass reinforced nylon) for the chosen grip material. FRN, if you are unfamiliar with its properties, one of which is the only one needed to know, and that is, it is basically indestructible in terms of mechanical strength, (as an aside, and now FRN is being 3D printed by some manufacturers) into parts which are stronger than Aluminium (6061-T) on a weight per weight basis!)
FRN will really take a beating.
FRN is available in many formulations and the one FKMD are using is very tactile both with wet or dry hands. The FX-9CM07 OD is NOT handle heavy, which is great for extended comfort.


Steel of Choice

Böhler's N690 (N69Zero) is the choice of the stainless. This high speed cobalt enhanced stainless tool steel is appearing to be the European norm for high quality knife manufacturing. excellent corrosion resistance and able to take a high hardness with good edge holding and zero chipping performance in real world conditions. N690 is also able to take various coating materials, from PVD, Ceramic and Teflon based coatings such as seen here with the use of Mondial's Idroglider coating.

Now to the blade design of the FKMD RIMOR


Having a finger choil on a big knife makes sense if you want some fine control abilities. It is a broad blade with a big swedge. 

There are no holes anywhere near a fulcrum point on this blade- makes for a strong blade.

Lashing holes for extended cutting tasks (honey retrieval, fungus retrieval, _notice I don't advocate tying the knife to a pole to make a spear- this is only for the movies). Cutting down out of reach fruit, coconuts etc. (see how I did this with my trusty FKMD Panabas).


The apparent "spear point" design enables good penetrative capabilities and the "belly" allows for use skinning game along with good control via the finger choil.

The Scabbard/carry system

The retention  strap can pivot. This is an important feature which prevents the knife from severing this strap when it it withdrawn from the scabbard. It also means the knife can be withdrawn with either left hand or right handed people.

Full Molle compatibility (sheath seen here detached from waist loop.

The sheath of the Rimor is a big improvement over the sheath of the Parus. At first glance these sheaths look similar but the sheath of the RIMOR has proper welt stitching, ie sandwiched between the two halves of the scabbard is a tough rubber-like insert. This insert will prevent the cutting edge from contacting the stitching and eventually severing it. This is great. However, the rubber material, whatever type it is they are using has this terrible chemical smell. I tried washing the scabbard but the smell remains. What this does is make the blade smell too. I found this quite strange, as I would have thought that the Idroglider coating would not absorb anything due to it being Teflon based. It's easy to remove the smell, simply wash the blade and it is gone**. That's something to remind myself of BEFORE cutting up raw meat or any food stuffs with this knife in this scabbard. It's not a negative but something which could be further improved upon.

** UPDATE 3-10-2019

I did further tests and found that after removing the knife which really stinks of this chemical, overnight out of the scabbard, the blade still smells just like the rubber material. This tells me that whatever this chemical odour is, it has been effectively absorbed into the Idroglider coating. I will be reporting this to Fox knives and would at this time recommend the use of the non coated blade for food preparation.

The sheath can be worn either on a belt in a traditional style carry position, 

Traditional belt carry and also Molle vest/pack.

or rapidly detached via a quality UTX Dura Flex (they are using genuine Dura Flex buckles too) quick release buckle system. Once detached the knife and scabbard can be quickly mounted in a Molle compatible system on a pack or vest etc. Although, the top Molle loop can not be accessed by the Molle strap (there is not enough flexibility in this rigid strap due to the position of the stitching (it's not a problem, just an observation). 

Attachment to a Molle system after detaching the scabbard via the genuine Dura Flex buckle system.

Because the scabbard is symmetrical, the knife can be placed for either left or right handed users. The scabbard Molle strap is very rigid, which is a good thing. There is also a metal grommeted drain hole on the back side of the sheath and a leg tie in loop sewn into the sheath; for multiple carry options.


The inside of the scabbard has hard plastic liners too to aid the longevity of the scabbard.

The black Idroglider coating is very hard wearing and helps protect the steel from unwanted corrosion especially if working around/in water a lot.

Ok that's enough for now to whet your appetite!


 Field Review Now ready here: at BushCampingTools!